Searching...

Download Tecno T345 Firmware

Download Tecno T345 Firmware - Hallo sahabat ANDROID TUTORIAL, Pada Artikel yang anda baca kali ini dengan judul Download Tecno T345 Firmware, kami telah mempersiapkan artikel ini dengan baik untuk anda baca dan ambil informasi didalamnya. mudah-mudahan isi postingan Artikel tecno, yang kami tulis ini dapat anda pahami. baiklah, selamat membaca.

Judul : Download Tecno T345 Firmware
link : Download Tecno T345 Firmware

Baca juga


Download Tecno T345 Firmware

Below is the direct link to download the Tecno T345 Firmware.

DOWNLOAD TECNO T345 FIRMWARE

Note:
Follow the instructions on how to flash the device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

TECNO T345 FIRMWARE

- Coolsand chip -
DOWNLOAD FIRMWARE


How To Flash

Using Volcano Box:

STEP 1: Download & extract the Firmware on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch Volcano Box.
STEP 4: Click on Coolsand &...
STEP 5: Select Write Flash.
STEP 6: Select the Bin File from the Firmware you have downloaded.
STEP 7: Select Auto-detect Pinouts (use pinouts connector).
STEP 8: Click on the Run button.
STEP 9: Patiently wait for device to connected.
STEP 10: Once the device has been connected,
STEP 11: Patiently wait for the process to complete.


Using Miracle Box:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch Miracle Box.
STEP 4: Power off device, Insert USB Cable on the device (don't power on), Press & hold the "0" button key until Open USB Download appears on device screen.
STEP 5: Click on Coolsand/RDA.
STEP 6: Select Write.
STEP 7: Click on the folder-like button to select Firmware on the location it is saved.
STEP 8: After Selecting Firmware,
STEP 9: Click on the Start button.
STEP 10: Connect device.
STEP 11: Patiently wait while the process completes.


Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please leave a comment after using this Firmware
Report if you cannot download this file.



Demikianlah Artikel Download Tecno T345 Firmware

Sekianlah artikel Download Tecno T345 Firmware kali ini, mudah-mudahan bisa memberi manfaat untuk anda semua. baiklah, sampai jumpa di postingan artikel lainnya.

Anda sekarang membaca artikel Download Tecno T345 Firmware dengan alamat link http://akatog.blogspot.com/2017/08/download-tecno-t345-firmware.html

0 comments:

Post a Comment

 
Back to top!